Boho Upcycled Velvet Planters

One of my favourite things to do with old tin cans is to make them into planters. Recently I made some large planters for the garden that looked like antique Chinese vases (see them here). However for these indoor planters I wanted something smaller and that would fit in with my decor.

The decor in my lounge has a bit of a Boho vibe and is full of rich colours. My curtains and some of my furniture is velvet in rich purple and pink hues. Therefore I decided to give these upcycled tin can planters a more of luxurious Boho make over.

All you need for this craft is some small tin cans in various sizes. Velvet ribbon of different thicknesses and a variety of similar shades.

Spray paint in colours similar to the velvet ribbon and some superglue gel.

Just because I think it looks better with the finished craft, I spray painted the tin cans.

Next, I measured the circumference of the tin can and cut the velvet ribbon to that length. I made sure I had enough strips of ribbon to fit the whole tin can.

I took the first length of velvet ribbon and glued it to the bottom edge of the tin can with a small dab of superglue gel. I just glued about 5mm of the ribbon to the tin.

I then wrapped the remainder of the ribbon tightly around the can and fixed it with another dab of superglue at the end.

I carried on adding strips of velvet ribbon to the can until it was all covered. If you have a bit of overlap at the top just fold the excess ribbon over the edge and glue it down. You can use small wooden pegs to keep the ribbon in place as the glue dries.